CONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMP IN AHMEDABAD MUMBAI CHENNAI BANGALORE HYDERABAD NASHIK DELHI PUNE KOLKATA INDIA

 

Continental Hydraulics LPV pumps are variable displacement, pressure compensated axial piston pumps.

They provide reliable, fast and quiet control and automatically adjust the output flow rate to maintain the set pressure.The maximum output flow can be limited via a maximum volume adjustment screw. All of the control compensator options are interchangeable on all pump sizes.

The series is available in five nominal displacements: LPV-4 (8 cc/rev) | LPV-8 (16.5 cc/rev) | LPV-11 (22 cc/rev) | LPV-17 (36 cc/rev) |  LPV-22 (46 cc/rev)

Across the range, operating pressure is 210 bar (3500 psi), flow at 1800 rpm ranges from 14.4 litres/minute to 82.8 litres/minute. Operating speeds are from 500 rpm minimum to 2000 rpm, maximum.

 

The LPV series of pumps, are variable displacement axial piston pumps with variable swash block, suitable for applications with open loop circuits and intermediate pressures. All of the Control Compensator options are interchangeable on all pump sizes. This very flexible Control Compensator design allows the LPV pump to be quickly changed as your circuit requirement demand.

 

• External shaft seal and bearing access for ease of servicing.
• Control Compensator options: Pressure Compensator, Remote Pressure, Load Sense and a D03 valve mount Allowing for pressure control circuits from dual pressure to Proportional pressure
• Swash block and saddle design permit consistent control and provide long life over Trunnion designs. Saddle bearing can also be easily serviced.
• Specially designed spherical port plate makes these extremely quiet operating pumps with optimized filling performance.
• Maximum volume adjustment standard

 

 

 

Variable volume pressure compensated piston pumps match flow to system demand. Your system will generate less heat, and may not need a heat exchanger. Your system can be kept simpler too, with fewer valves and regulators, while still maintaining constant pressure. For long term reliability, and optimum performance,PowrFlow™ HPV Axial Piston Pumps are your best value.

 

 

Direct Equivalent

Replace your old Denison PV and Vickers PVB with the Continental HPV range of piston pumps. Output flow sizes are equal to the Denison and Vickers pumps including the 6, 10, 15, 20 and 29 gallons per minute @ 1750 RPM units.  Contact us with your Denison PV or Vickers PVB part number for a direct Continental hydraulics replacement pump.

 

 

Features and Benefits

Simple Construction for long, dependable service.

More contamination-tolerant than competitive pumps to improve dependability and reduce maintenance costs.

Quiet operation simplifies meeting system sound level standards.

Economical – low overall cost for a high performance variable volume pump.

Efficient, energy-saving design.

 

Higher pressure HPVR  inline axial piston variable displacement pump.

 

The new HPVR pumps feature increased pressure capability, reduced weight, increased component strength, quieter running and further improved reliability.

The HPVR pumps are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that will meet most applications.

The output flow and pressure is controlled by a variety of control options, and can easily work in conjunction with external control components making them the perfect choice for almost any application.

The HPVR series pumps are available in both SAE and ISO mounting 2 bolt patterns. Porting is available in rear and side locations as well as thru-drive configurations.

Features and Benefits

• Continuous operating pressure of 275 Bar 
• Simple Construction for long, dependable service.
• More contamination-tolerant than competitive pumps to improve dependability and reduce maintenance costs.
• Quiet operation simplifies meeting system sound level standards.
• Economical – low overall cost for a high performance variable volume pump.
• Efficient, energy-saving design.

 

 

PRESSURE COMPENSATED CONTROL (Standard) By controlling the system pressure, the standard pressure compensated control changes pump displacement to match the system’s flow requirement. Simply stated: a pressure compensated pump will provide variable flow at a constant pressure setting. Pump displacement is mechanically controlled by the angle of the swash plate. The swash plate angle is controlled by the extension of the compensator plunger working against the swash plate bias spring. The compensator senses downstream pressure and adjusts displacement to maintain the set pressure. The control would be used on systems requiring variable flow but unchanging pressure.

 

Continental HPV range of piston pumps : HPV-6, HPV-10, HPV-15, HPV-20, HPV-29, HPV Continental Hydraulic Axial Piston Pump

 

HPV Series Axial Piston Pumps

With our variable volume axial piston pumps the input horsepower closely matches output horsepower in these highly efficient pumps. They are designed to closely match the Eaton-Vickers® PVB and PVQ and the Parker-Denison PV series of pumps in physical size and port location for ease of interchange and replacement.

Quiet Operation

Combining new technology, strict engineering disciplines and efficiently designed porting has reduced noise to very low levels.

Simple Construction

For a long and productive life.

Application Flexabilty

Four pump controls, Tandem pump options for multiple pump applications; high speed operation for mobile applications, maximum volume control is standard for application versatility.

Rugged Construction

Heavy duty cylinder block and body castings provide long life and reduced noise, hardened swash plate for extended trunnion life.

Compact Size

Designed to maximize the use of valuable space.

Maximum Volume Adjustment

Allows you to set the pump displacement to match the maximum system flow requirements and prevents overloading of the system.

 

Model Series	Max Continuous Pressure	Volumetric Displacement CC/Rev	Theoretical Flow @ 1450 RPM	Mounting Flange
HPV-6B35	3500 PSI	14.4	20.88 Lit/Min	SAE. A 2 Bolt
HPV-10B35	3500 PSI	21.1	30.60 Lit/Min	SAE. B 2 Bolt
HPV-15B35	3500 PSI	34.2	49.60 Lit/Min	SAE. B 2 Bolt
HPV-20B35	3500 PSI	42.9	62.20 Lit/Min	SAE. C 2 Bolt
HPV-29B35	3000 PSI	61.9	89.70 Lit/Min	SAE. C 2 Bolt

 

Designed to be Rebuildable

Great care was taken in the design of this pump to ensure that when it is in need of service, it can be disassembled and brought back into service with replaceable port and wear plates, simplifying maintenance.

 

Description

The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that will meet most applications. The output flow and pressure is controlled by a variety of control options, and can easily work in conjunction with external control components making them the perfect choice for almost any application. The HPVR series pumps are available in both SAE and ISO mounting 2 bolt patterns. Porting is available in rear and side locations as well as thru-drive configurations.

Key Features:

• Continuous Duty Medium Pressures capable, up to 4000 PSI (275 Bar)
• Improved Trunnion Bearing design allows for long life and low hysteresis
• Tandem mounting capable
• Pressure Compensated, Load Sense, Remote Pressure
• Expanded Porting Options; Rear and Side ports with SAE Threads, Metric Threads, Split Flange Ports
• Interchangeable with many pump Manufactures
• Maximum volume adjustment – standard

 

 

 

Continental Hydraulics HPVR Axial Piston Pump :

Description

Continental Hydraulics HPVR inline axial piston pumps have medium-high working pressure capabilities making them suitable for a wide variety of applications.

 

The series is available in 5 nominal displacements and 3 compact frame sizes: HPVR-6 (14.4 cc/rev) | HPVR-10 (20.6 cc/rev) | HPVR-15 (34.3 cc/rev) | HPVR-20 (42.9 cc/rev) | HPVR-29 (61.9 cc/rev)

 

Across the range, these pumps are pressure compensated from 13.8 to 276 bar (200 to 4000 psi) for continuous duty, and up to 310 bar (4500 psi) intermittently.

 

HPVR series pumps are available in both SAE and ISO mounting 2 bolt patterns. Porting is available in rear and side locations as well as through-drive configurations.

 

Download the Continental Hydraulics HPVR Technical Catalogues: HPVR-6 | HPVR-10 | HPVR-15 | HPVR-20 | HPVR-29

 

 

ORBITAL^® Hydraulic Variable Displacement Piston  Pumps Suppliers in Ahmedabad Mumbai Chennai Bangalore Hyderabad Nashik Pune Indore Jaipur Delhi Surat Rajkot Vadodara Kolkata India

We are dealing in ORBITAL^® Make Hydraulic Piston Pumps in India

ORBITAL^® Hydraulic Variable Displacement Piston Pumps Suppliers in Ahmedabad Mumbai Chennai Bangalore Hyderabad Nasik Pune Indore Jaipur Delhi Surat Rajkot Vadodara Kolkata India

 

 

 

Our Ex-stock of ORBITAL^® Hydraulic Piston Pumps Range and Model no as under:

 

 

Low noise

” Realized low noise operation in overall pressure area on each series.

High efficiency

” Oil temperature rise can be reduced due to the less power-loss.

Accordingly, it is possible to design the tank in small size.

High reliability

” High response, high stability, and long life make it possible to increase the reliability of the

main machine.

 

 

J-V15A1RX-95	V23A4R-30	J-V15A3RX-95	V23A4R-30RC
J-V8A1RX-20	V23A4RX-30	V15A11R-95	V23A-4RX-30
V15A1L-95	V23A4RX-30RC	V15A1LX-95	V23C11RHX-30
V15A1R-40SK	V23C11RJAX-35	V15A1R-95	V23C11RJBX-35
V15A1RX-40	V23C11RJNX-35	V15A1RX-95	V23C11RJPX-35
V15A1RX-95S14	V23C12RHX-30	V15A1RY-95	V23C12RJAX-35
V15A2L-95	V23C12RJBX-35	V15A2LX-95	V23C12RJNX-35
V15A2R-95	V23C12RJPX-35	V15A2RX-95	V23C13RHX-30
V15A3L-95	V23C13RJAX-35	V15A3LX-95	V23C13RJBX-35
V15A3R-95	V23C13RJNX-35	V15A3R-95RC	V23C13RJPX-35
V15A3RX-95	V23C14RHX-30	V15A-3RX-95	V23C14RHX-30RC
V15A3RX-95RC	V23C14RJAX-35	V15AI10-R-L	V23C14RJAX-35RC
V15AIR-95	V23C14RJBX-35	V15AIRX-95	V23C14RJBX-35RC
V15C11RHX-95	V23C14RJNX-35	V15C11RJAX-95	V23C14RJNX-35RC
V15C11RJBX-95	V23C14RJPX-35	V15C11RJNX-95	V23C14RJPX-35RC
V15C11RJPX-95	V23C21RHX-30	V15C12RHX-95	V23C22RHX-30
V15C12RJAX-95	V23C22RJAX-35	V15AIRX	V23A4RX
V15C12RJBX-95	V23C22RJBX-35	V15C12RJNX-95	V23C22RJNX-35
V15C12RJPX-95	V23C22RJPX-35	V15C13RHX-95	V23C23RHX-30
V15C13RHX-95RC	V23C23RJAX-35	V15C13RJAX-95	V23C23RJBX-35
V15C13RJAX-95RC	V23C23RJNX-35	V15C13RJBX-95	V23C23RJPX-35
V15C13RJBX-95RC	V23C242RJBX-35	V15C13RJNX-95	V23C24RHX-30
V15C13RJNX-95RC	V23C24RHX-30RC	V15C13RJPX-95	V23C24RJAX-35
V15C13RJPX-95RC	V23C24RJAX-35RC	V15C22RHX-95	V23C24RJBX-35RC
V15C22RJAX-95	V23C24RJNX-35	V15C22RJBX-95	V23C24RJNX-35RC
V15C22RJNX-95	V23C24RJPX-35	V15C22RJPX-95	V23C24RJPX-35RC
V15C23RHX-95	V23D11RJAX-35	15C23RHX-95RC	V23D11RJBX-35
V15C23RJAX-95RC	V23D11RJNX-35	V15C23RJBX-95RC	V23D11RJPX-35
V15C23RJNX-95RC	V23D12RA-35	V15C23RJPX-95RC	V23D12RAX-35
V15D11RAX-95	V23D12RB-35	V15D11RBX-95	V23D12RBX-35
V15D11RNX-95	V23D12RJAX-35	V15D11RPX-95	V23D12RJBX-35
V15D12RA-95	V23D12RJNX-35	V15D12RAX-95	V23D12RJPX-35
V15D12RB-95	V23D12RN-35	V15D12RBX-95	V23D12RNX-35
V15D12RN-95	V23D12RP-35	V15D12RNX-95	V23D12RPX-35
V15D12RP-95	V23D13RJAX-35	V15D12RPX-95	V23D13RJBX-35
V15D13RAX-95	V23D13RJNX-35	V15D13RAX-95RC	V23D13RJPX-35
V15D13RBX-95	V23D14RJAX-35	V15D13RBX-95RC	V23D14RJAX-35RC
V15D13RNX-95	V23D14RJBX-35	V15D13RNX-95RC	V23D14RJBX-35RC
V15D13RPX-95	V23D14RJNX-35	V15D13RPX-95RC	V23D14RJNX-35RC
V15A1LX-95	V15D22RAX-95	V15A1RX-95	V15D22RBX-95
V15A2LX-95	V15D22RNX-95	V15A2RX-95	V15D22RPX-95
V15A3LX-95	V15D23RAX-95	V15A3RX-95	V15D23RAX-95RC
V15A3RX-95	V15D23RBX-95	V23A1R-30	V15D23RBX-95RC
V23A1RX-30	V15D23RNX-95	V23A2R-30	V15D23RNX-95RC
V23A2RX-30	V15D23RPX-95	V23A3R-30	V15D23RPX-95
V23A3RX-30	V15D23RPX-95RC	V23A4R-30	V15SASJBRX-95S3
V23A4RX-30	V23A1R-30	V38A1RX-95	V23A1RX-30
V38A2RX-95	V23A1RX-30	V38A3RX-95	V23A2R-30
V38A4RX-95	V23A2RX-30	V8A1LX-20	V23A3LX-30
V8A1RX-20	V23A3R-30	V8A1RX-20RC	V23A3RX-30
J-V15A1LX-95	V23A3RX-30RC	V15A3RX	V15A2RY

 

 

 

 

We are ORBIT HYDRAULIC SYSTEM Authorised Dealers, Suppliers of Equivalent Hydraulic Piston Pump to Danfoss, Daikin, DAIKIN, Duplomatic, YEOSHE, CASAPPA, Duplomatic, HANSA-TMP, HYDAC, HYDROMECH, HYDROSILA, Atos, KCL, Camel, Kompass, TAICIN, Ealy-Orbit, CONTINENTAL, REXROTH A10VO SERIES, VELJAN, YUKEN, TOKIYO-KEIKI, YUTIEN, PARKER, BONDIOLI-PAVESI series.

 

 

Dainkin Piston Pumps characterized by low noise, high efficiency, and high reliability.

 

V series Piston Pump

Daikin V series piston pump are the standard variable displacement piston pumps. Products characterized by low noise, high efficiency and high reliability are brought together in a series covering the range from 8 to 70 cc/rev.

 

VZ series Piston Pump

Daikin VZ series piston pump realize highly intensified outputs by adopting a cradle swash plate. Products in the range from 50 to 130 cc/rev are brought together as a series.

 

VD series Dual Pump

Daikin VD series piston pump dual pumps that integrate a V series piston pump and a vane pump in one body.

 

V1515 series Dual Pump

Daikin V1515 series dual piston pumps that connect two V15 pumps in one body.

 

 

We are offering our valued clients an impeccable range of Hydraulic Pump. In this range, we provide gear pumps, load sensing axial piston pumps; variable piston pumps open loop and bend axis axial piston. Manufactured using high-grade stainless steel and other materials, these products conform to the defined parameters of the industry. To cater to the needs of our valued clients, these products are available in various specifications. Furthermore, all our products are quality-assured for the satisfaction of our valued clients on delivery. Hydraulic pumps are sources of power for many dynamic machines. Hydraulic pumps are capable of pushing large amounts of oil through hydraulic cylinders or hydraulic motors. In this fashion, the pump converts the mechanical energy of the drive (i.e. torque, speed) into hydrostatic energy (i.e. flow, pressure).

our range of Hydraulic pump :

Hydraulic Gear Pumps (External gear pump , Internal gear pump ) Hydraulic Vane Pumps , Hydraulic Piston Pumps (Axial piston pump , Radial piston pump)

We are offering our valued clients an impeccable range of Hydraulic Pump. In this range, we provide gear pumps, load sensing axial piston pumps; variable piston pumps open loop and bend axis axial piston.

 

 

Hydraulic Motors, Hydraulic orbital motor, Hydraulic Gear Motor, Hydraulic Close Loop Motor, Hydraulic Ze-roter Motor, Hydraulic Piston Motor , Hydraulic Spline shaft Motor, Hydraulic Keyway shaft Motor, Hydraulic Disc Valve Motor Etc

​

We are Also Dealing & Replacement Hydraulic Motors Like : Danfoss, Parkar, Eaton, Zihyd, M+S, Intermot, SAI Hydromotor, Sauer Danfoss, Rexroth, Kawasaki Staffa, JMDG Hydraulic Motor, Hydac, Bosch Rexroth, Eaton Vickers, Stauff, Parker, Polyhydron, Yuken, Casappa, Hydroline, Hydax, Verco, Yuci Yuken, Spica, Duplomatic, Atos, Winner, DAIKIN, Dowty, White, Bucher, Char-Lynn,  Hydrocontrol, Badestnost, Youli, Sun, Caterpillar, Daikin, Danfoss, Denison, Hägglunds, Hawe, Herion, Hydromatik, Komatsu, Linde, Mannesmann Rexroth, Oilgear, Parker-Store, Poclain, Racine, Rollstar, Salami, Sauer, Sauer-Danfoss, Uchida, Etc..

 

We are dealing Hydraulic Product and service provider of major city in India … Mumbai, Bangalore, Chennai, Ahmedabad, Delhi, Kolkata, Haryana, Gurgaon, Coimbatore,  Bhopal, Rajkot, Vapi, Daman, Nagpur, Aurangabad, Mangalore, Jharkhand, Punjab, Gandhidham, Uttrakhand, Orissa, Hyderabad, Bharuch, Ankleshwar, Gujarat, Madhya Pradesh, Jaipur, Rajasthan, New Mumbai, Surat, Baroda, Vadodara, Pune, Chandigarh, Ludhiana, Indore, Goa, Vizag, Vishakhapatnam, Nashik, Ernakulam, Kolhapur, Maharashtra. Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Mizoram, Jammu & Kashmir, Jharkhand, Karnataka, Kerala, Manipur, Meghalaya, Nagaland, Orissa, Sikkim, Tamil Nadu, Tripura, Uttar Pradesh, Uttaranchal and West Bengal. Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli, Lakshadweep and Pondicherry, Umbergaon, Silvasa, Mehsana, Lucknow. Kanpur, Thane, Bhopal, Visakhapatnam, Patna, Bihar, Ghaziabad, Agra, Faridabad, Meerut, Vasai-Virar, Varanasi, Dhanbad, Amritsar, Navi Mumbai, Allahabad, Ranchi, West Bengal, Jabalpur, Gwalior, Vijayawada, Jodhpur          , Madurai, Raipur, Chhattisgarh, Kota, Guwahati, Solapur, Hubballi-Dharwad, Bareilly, Moradabad, Mysore, Jalandhar, Tiruchirappalli, Bhubaneswar, Trivandrum (Thiruvananthapuram), Bhiwandi,  Saharanpur, Gorakhpur, Guntur, Bikaner, Amravati, Noida, Jamshedpur, Bhilai, Cuttack, Firozabad, Kochi (Cochin), Dehradun,  Asansol, Nanded, Kolhapur, Ajmer,  Jamnagar, Siliguri, Jhansi, Sangli-Miraj , Belgaum, Mangalore, Tirunelveli, Jalgaon, Udaipur, Akola, Bokaro, Bellary, Patiala, Agartala, Dhule, Rohtak, Bhilwara, Ahmednagar, Thrissur, Hisar, Panipat, Karnal, Bathinda, Rourkela, Puducherry,

Your one-stop hydraulic products resource… If it’s hydraulic we can supply it!

 

Contact Details:

Vishal Pipavat

Call Us

Ahmedabad Gujarat India   : 09998789116

Mumbai Mahara1shtra India : 08000000816

 

 

For More Details Visit Website: